|
Model
|
Hantek DSO5062B
|
|
Bandwidth
|
60MHz
|
|
Real-time Sample Rate
|
1GSa/s
|
|
Equivalent Sample Rate
|
25GSa/s
|
|
Memory Depth(Sample Points)
|
Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K depths may also be selected)
|
|
SEC/DIV Range
|
4nS/div-40S/div (in a 2, 4, 8 sequence)
|
|
Delay Time Accuracy
|
500ps
|
|
Vertical
|
|
A/D Converter
|
8-bit resolution, each channel sampled simultaneously
|
|
VOLTS/DIV Range
|
2mV/div~5V/div at input BNC
|
|
Position Range
|
±50V(5V/div),±40V(2V/div~500mV/div),2V(200mV/div~50mV/div)±400mV(20mV/div~2mV/div)
|
|
Bandwidth Limit
|
20MHz
|
|
Rise Time at BNC
|
≤5.8ns
|
|
DC Gain Accuracy
|
±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
|
|
Trigger
|
|
Trigger Sensitivity
(Edge Trigger Type)
|
DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
EXT(Typical) 200mV from DC to 40MHz
EXT/5(Typical) 1V from DC to 40MHz
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity
|
|
Trigger Level Range
|
CH1,CH2: ±8 divisions from center of screen
EXT: ±1.2V EXT/5: ±6V
|
|
Trigger Level Accuracy,
typical (Accuracy is for signals having rise and fall times ≥20ns)
|
CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
EXT: ±(6% of setting + 40mV)
EXT/5: ±(6% of setting + 200mV)
|
|
Holdoff Range
|
100ns-10s
|
|
Trigger Type
|
|
Edge
|
Trigger on the rising or falling edge
|
|
Pulse Width
|
Trigger (when >,<,=,≠) on positive or negative pulses
Pulse Width Range: 20ns-10s
|
|
Video
|
Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
|
|
Slope
|
Trigger (when >,<,=,≠) on a positive or negative slope
Set Time: 20ns–10s
|
|
Overtime
|
from the rising or falling edge
Set Time: 20-10s
|
|
Alternate
|
Internal trigger on edge, pulse width, video or slope
|
|
Measurement
|
|
Cursors
|
Manual: The difference between voltage cursors; the difference between time cursors ; calculated by Hz.
Tracing: The voltage and time at a waveform point
|
|
Automatic
|
Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
|
|
Display
|
|
Type
|
Right angle 7"TFT 16-digit color LCD
|
|
Resolution
|
800*480 dots
|
|
Contrast
|
16 gears, with the progress bar to show adjustment
|
|
Interface
|
USB host and USB slave
|
|
Power Supply
|
|
Universal Input Voltage
|
100-120VACRMS(±10%),45Hz to 440Hz,CAT II
120-240VACRMS(±10%),45Hz to 66Hz,CAT II
|
|
Power
|
<30W
|
|
Fuse
|
2A, T rating, 250V
|
|
Mechanical
|
|
Size
|
Length: 313mm Width: 108mm Height: 142mm
|
|
Weight
|
4.6 lbs(not including packing and accessories)
|
