0.81mm Lead Free Solder Wire Tube Sn96 4900-35G

Be the first to review this product

Qty In Stock: 398

Excl. Tax: £4.15 Incl. Tax: £4.98
OR

Quick Overview

Lead Free Solder Wire - 0.81mm, 96.3% tin, 0.7% copper and 3% silver

Details

Lead Free Solder Wire

MG Chemicals Part No.; 4900-35G

0.81mm, 96.3% tin, 0.7% copper and 3% silver

M.G. Chemicals no clean Lead-Free Solder was designed with Sn/Ag/Cu (Tin/Silver/Copper) alloys as a lead-free alternative for the standard Tin and Lead solder. These alloys conform to the impurity requirements of J-Std-006 and RoHS. Use this solder anywhere you would use normal solder.

If your products might enter Europe or California, you must ensure they are RoHS compliant.

Products containing lead will not comply. To read more on this issue visit our RoHS Issue AppGuide 

Features / Benefits

  • Lead free
  • Complies with RoHS
  • Exceeds the impurity requirements of J-Std-006
  • No Clean flux
  • 21 Gauge, 0.032" diameters
  • Excellent wettability
  • Hard non-conductive residues
  • 1 lb of lead free solder has 27% more length than leaded solder

Flux Percentage

M.G. Chemicals Lead Free Solder utilizes a state-of-the-art automatic wire extrusion and wire drawing machines to manufacture consistent solder. The introduction of flux core in the wire extrusion process involves constant monitoring of flux percentage to ensure minimal flux voids and irregular wire. Typical flux percentage for our Lead Free Solder is 2.0-4.0%.

Flux Core

A unique flux system was specifically used for high temperature lead free alloys. It provides the fluxing activity levels that promote fast wetting action and maximum wetting spread. Utilizing synthetically refined resin and very effective activator that wets and spreads like an RA type. This special activator exhibits virtually no spattering. Activator conforms to J-STD-004, REL0.Cleaning Flux core is a no clean formulation therefore the residues do not need to be removed for typical applications. 


 Test MethodSpecification
Ag content 2.8-3.2%
Cu content 0.3-0.7%
Sn content Balance
Flux Classification JSTD-004 ORL0
Copper Mirror IPC-TM-650 2.3.32 No removal of copper film
Silver Chromate IPC-TM-650 2.3.33 Pass
Corrosion IPC-TM-650 2.6.15 Pass
SIR JSTD-004,Pattern Down IPC-TM-650 2.6.3.3 2.33 x 1011 ohms
SIR Bellcore (Telecordia) Bellcore GR-78-CORE 13.1.3 6.12 x 1011 ohms
Electromigration Bellcore GR-78-CORE 13.1.4 Pass
Post Reflow Flux Residue TGA Analysis 55%
Acid Value IPC-TM-650 2.3.13 190-210
Flux Residue Dryness IPC-TM-650 2.4.47 Pass
Spitting of Flux-Cored Solder IPC-TM-650 2.4.48 0.3%
Solder Spread IPC-TM-650 2.4.46 130 mm2
Lead free/leaded solder comparisonLead Free Solder (Sn/Ag/Cu)Sn63/Pb37 (Leaded Solder)
Melting Point 217-221ºC (422.6 - 429.8ºF) 183 ºC (361.4 ºF)
Upper Temperature Limit Do not to exceed 350 ºC (tip temperature) Do not to exceed 260 ºC (tip temperature)
Wire Diameter 0.032” (0.81 mm) 0.032” (0.81 mm)
Std. Wire Gauge 21 21
Tolerance, in. +/- 0.002” +/- 0.002”
Hardness, Brinell 15HB 14HB
Coefficient of Thermal Expansion Pure Sn=23.5 24.7
Tensile Strength 4312 psi 4442 psi
Density 7.39 g/cc 8.42 g/cc
Electrical Resistivity 13.0 μohm-cm 14.5 μohm-cm
Electrical Conductivity 16.6 %IACS 11.9 %IACS
Yield Strength, psi 3724 3950
Total Elongation,% 27 48
Joint Shear Strength, at 0.1mm/min 20ºC 17 14
Creep Strength, N/mm2 at 0.1mm/min 20ºC 13.0 3.3
Creep Strength, N/mm2 at 0.1mm/min 100°C 5 1
Thermal Conductivity 58.7 W/m * K 50.9 W/m * K
- See more at: http://www.mgchemicals.com/products/solder/non-leaded/sn96-4900/#sthash.CN1PtFSS.dpuf


Additional Information

Brand MG Chemicals
MG Product Type Solder Wire - Non-Leaded