48 volt DIN Rail DC switch mode power supply 48V 2.5A 120W
DIN rail supplies are a long awaitied addition to our power supply range.
As we have been stocking the Heng Fu range for many years now, we are confident of the quality and reliability of these supplies.
Coupled with competitive pricing, there really is no need to source elsewhere.
HF120W-SFDR-48
Universal AC input, 48 VDC Output, 100% load burn-in tested.
Overload, over voltage and short circuit protection.
- Load regulation: 0.5%
- R&N: 120mV p-p
- Efficiency: 87%
Dimensions:
45.4mm x 99.5mm x 114mm
Specification:
AC input range selected by switch High reliability, low cost Installed on DIN rail TS35 / 7.5 or 15 Approvals:CE Protections: overload/ over voltage/ short circuit | |
AC input voltage range | 85~132/ 170~264VAC selected by switch |
Input frequency | 47~63Hz |
Inrush current | cold start, 20A/115V, 40A/230V |
Input leakage current | Less than 1mA/ 230VAC |
Line regulation (full load) | Less than or equal to +/- 0.5% |
Output voltage adjust range | +/- 10% |
Output overload protection | 105~150%, hiccup mode, auto recovery |
Output over voltage protection | 115~150%, shut off, re-power on to recover |
Withstand voltage | I/P -O/P: 3.0KVAC/1min I/P -F/G: 1.5KVAC/1min O/P-F/G: 0.5KVAC/1min |
Rise time | 50ms@full load (typical) |
Hold up time | 20ms@full load (typical) |
Operating temperature | -20 deg C ~ +50 deg C |
Safety standards | meet UL508, UL60950, EN60950 |
EMC standards | meet EN55022 classB, EN55024 EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11 |
Cooling method | convection |
Connection | 3P/ 7.5mm pitch 4P/ 5.0mm pitch, plug-in terminal block |
Weight | 0.54kg/pcs |