MG Chemicals 8MT-50 Pack of 5 Mixing Tips to fit Dispensing Gun for Cartridge Epoxy Systems

344 In stock
SKU
MG-8MT-50
£11.58 £9.65
 

8MT-50 Mixing Tips for Epoxy Cartridge Dispensing Gun

The 8MT Mixing Tips are single use static mixer for 2-part low to medium viscosity cartridge systems. The mixer works using stationary elements inside a narrow cylindrical tube. This forces the materials to combine as it travels through the length of the mixer and provides a homogenous mix of hardener and resin that can be applied directly onto the targeted area.

Simply remove the cartridge nut and plug, attach the static mixer to the tip, and re-screw on the nut to hold the mixer in place. To reuse a partially filled cartridge with the single use static mixer, simply remove the nut and plug preserving the remaining epoxy in the cartridge, and affix a new mixing tip to the end.

The 8MT-50 Mixing Tip unit features a standard flow tip while the 8MT-50FT has a fine tip for greater precision dispensing. It is designed to dispense an even and accurate amount of compound eliminating spoilage. Simply attach the tip to dual cartridge end and twist to lock. To reuse a partially filled cartridge, simply remove the cap preserving the remaining epoxy in the cartridge, and affix a new mixing tip to the end.

 

Features
  • Allow precise application directly where you need it
  • Provides homogeneous mixture of low to medium viscosity 2-part systems
Catalog Number# of ElementsElement WidthOutlet Inner DiameterTotal LengthFor Use With
8MT-25 16 5.4mm 1.2mm 111.8mm

8332-25ML
832HD-25ML
832HD-50ML

8MT-50 16 5.3mm 1.5mm 90.7mm

832HD-50ML
8329TCF-50ML
8329TFM-50ML
8329TFS-50ML
9200-50ML
9200FR-50ML

8MT-50FT 12 3.2mm 0.7mm 63.5mm

832HD-50ML
8329TCF-50ML
8329TFM-50ML
8329TFS-50ML
9200-50ML
9200FR-50ML

8MT-450 17 8mm 3mm 165mm

832C-450ML
832HD-400ML

Write Your Own Review
You're reviewing:MG Chemicals 8MT-50 Pack of 5 Mixing Tips to fit Dispensing Gun for Cartridge Epoxy Systems
Your Rating