MG Chemicals FAST SETTING EPOXY - 8332-25ML
Fast Set Epoxy - Dual Syringe - 8332-25ML
Please note: This product is classed as Limited Quantity and can therefore ship by Ground transportation only. These items cannot be carried by Royal Mail. Shipping is therefore calculated based on using our LQ certified courier.
Shipping to Europe varies dependant on destination and is calculated at checkout. Please use the 'estimate shipping' tab. If you are unable to obtain a rate online for your region, please send us an email and we will be happy to provide a quote for you.
MG product Code: 8332-25ML
Provides 2300 psi bonding strength to paper, wood, metal, and ceramics. Conveniently packaged in a 25 ml dual syringe with a twist off cap for easy mixing. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents.
- Easy 1:1 mixing ratio
- Fast setting (5 minutes)
- 2300 psi of bonding strength
- Resistant to water, salt spray, inorganic acids and bases and most organic solvents
Provides 2300 psi bonding strength to paper, wood, metal, and ceramics. Conveniently packaged in a 25 ml dual syringe with a twist off cap for easy mixing. It gives good resistance to water, salt spray, inorganic acids and bases, and most organic solvents.
Easy 1:1 mixing ratio
Fast setting (5 minutes)
2300 psi of bonding strength
Resistant to water, salt spray, inorganic acids and bases and most organic solvents
Technical Data:
Uncured Properties | |
Colour | Clear |
Cured Color | Yellowish |
Mix Ratio by Volume | 1:1 |
Part A Viscosity | 12,000 cps |
Part B Viscosity | 13,000 cps |
Mixed Viscosity | 12,500 cps |
Part A Specific Gravity | 1.16 |
Part B Specific Gravity | 1.15 |
Mixed Specific Gravity | 1.16 |
Pot Life | 3 - 5 min |
Mass | 20 g |
Tensile Strength | 2,300 psi |
Temperature Range | -60°F to 250°F |
Hardness (Shore D) | 80 |
Dielectric Contstant (25°C, 100 Hz) | 4.5 |
Specific Volume | 23.7 in3/lb |
Volume Resistivity | 8 x 1014 ohm · cm |
*All properties given are at 25°C unless otherwise noted.