ETCH RESIST PEN 416-RP

Etch Resist Pen

MG Product Code: 416-RP

• Draws lines 0.79mm (1/32") wide
• Dries instantly
• Can be removed with Thinner Cleaner (Cat. No. 435)

Compatible for use with Ferric Chloride.

Not compatible for use with Sodium Persulfate and Ammonium Persulphate.

• See more at: http://www.mgchemicals.com/products/prototyping-and-circuit-repair/prototyping/etch-resist-pen-416-rp/#sthash.I7T28Kzo.dpuf

Technical Data for 416-RP Etch Resist Pen:

with 410-1KG

Starting point of stripping 416-RP @ 50-55°C 5 minutes

Starting point of stripping 416-RP @ Room temperature 7 minutes

100% Etching of copper @ 50-55°C 18 minutes

100% Etching of copper @ Room temperature 90 minutes

with 4101-1KG

Starting point of stripping 416-RP @ 50-55°C 9 minutes

Starting point of stripping 416-RP @ Room temperature 10 minutes

100% Etching of copper @ 50-55°C 14 minutes

100% Etching of copper @ Room temperature 90 minutes

with 415-500ML

Starting point of stripping 416-RP @ 50-55°C 15 minutes

Starting point of stripping 416-RP @ Room temperature 45 minutes

100% Etching of copper @ 50-55°C 18 minutes

100% Etching of copper @ Room temperature 42 minutes