26 Volt Power Supply for Schindler Lift Systems Elevators DC 26V 6.0A 150W PSU
Heng Fu 150W-SDR-26A Replacement Spare Power Supply for Schindler Lift Systems.
A genuine replacement part for Schidnler elevators running on 26V / 6A supply.
Features:
Installed on DIN rail TS35/ 7.5 or 15
Approvals: UL508 listed, UL/ CUL/ CE
High reliability, compact design
Protections: overload/ over voltage/ short circuit
5 years limited warranty
lF615DRA 108.4 x 74.2 x 109(mm)
AC input voltage range | 187~264VAC |
Input frequency | 50/60Hz |
Inrush current | cold start, 40A/230V |
Input leakage current | <1mA/ 230VAC |
Line regulation (full load) | ≤±0.5% |
Output voltage adjust range | ±10% |
Output overload protection | 110~130%, delay shutdown, re-power on to recover |
Output over voltage protection | 115~150%, shut off, re-power on to recover |
Withstand voltage | I/P -O/P: 3.0KVAC/1min I/P -F/G: 1.5KVAC/1min O/P-F/G: 0.5KVAC/1min |
Rise time | 50ms@full load (typical) |
Hold up time | 20ms@full load (typical) |
Operating temperature | -20℃~+50℃ |
Safety standards | UL508, UL60950, EN60950 approved |
EMC standards | meet EN55022 classB, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11 |
Cooling method | convection |
Connection | 3P/ 6.35mm pitch 4P/ 6.35mm pitch, screw terminal block |
Weight | 0.67kg/pcs |