MG Chemicals 8MT-50 Pack of 5 Mixing Tips to fit Dispensing Gun for Cartridge Epoxy Systems
8MT-50 Mixing Tips for Epoxy Cartridge Dispensing Gun
The 8MT Mixing Tips are single use static mixer for 2-part low to medium viscosity cartridge systems. The mixer works using stationary elements inside a narrow cylindrical tube. This forces the materials to combine as it travels through the length of the mixer and provides a homogenous mix of hardener and resin that can be applied directly onto the targeted area.
Simply remove the cartridge nut and plug, attach the static mixer to the tip, and re-screw on the nut to hold the mixer in place. To reuse a partially filled cartridge with the single use static mixer, simply remove the nut and plug preserving the remaining epoxy in the cartridge, and affix a new mixing tip to the end.
The 8MT-50 Mixing Tip unit features a standard flow tip while the 8MT-50FT has a fine tip for greater precision dispensing. It is designed to dispense an even and accurate amount of compound eliminating spoilage. Simply attach the tip to dual cartridge end and twist to lock. To reuse a partially filled cartridge, simply remove the cap preserving the remaining epoxy in the cartridge, and affix a new mixing tip to the end.
|Catalog Number||# of Elements||Element Width||Outlet Inner Diameter||Total Length||For Use With|